Owners manual

CyberPower Remote Management System
17
Keywords
This parameter is a string used to describe the entity (max length 31
characters).
importance
This parameter is a value between 1 and 100 that shows the entity
importance high to low.
[UPS->PowerPanel
®
List] Display the Information of the connected PPBE (PowerPanel
®
Business
Edition) Clients. The connection is established by PPBE Clients. The listed clients will be removed if
disconnected for 1 hour.
Item
Definition
Configuration
Max Clients Shutdown
Time (MST)
The max time that all the connected clients require to shutdown.
Max Clients Shutdown
Delay Time (MSDT)
The max value required from the moment utility power fails until all the
clients gracefully shutdown.
[Envir] Following items can be displayed/configured through the Envir page.
[Envir->Status] Display the basic information of the environmental sensor and contact closure inputs.
Item
Definition
Information
Name
The name of the environmental sensor.
Location
The location of the environmental sensor.
Temperature
Current Value
The current environmental temperature.
Maximum
The highest temperature and time detected by the environmental sensor.
Minimum
The lowest temperature and time detected by the environmental sensor.
Humidity
Current Value
The current environmental humidity.
Maximum
The highest humidity and time detected by the environmental sensor.
Minimum
The lowest humidity and time detected by the environmental sensor.
Contact
Display the name and status (Normal/Abnormal) of contact closure
inputs.
[Envir->Configuration] Configure the parameters of the environmental sensor.
Item
Definition
Information
Name
The name used to identify the environmental sensor.
Location
The place where the environmental sensor is located.