Owners manual

CyberPower Remote Management System
9
Envir Data
Name
The name of the environmental sensor.
Location
The location of the environmental sensor.
Recent Device Events
A list of device events that recently occurred.
[UPS] The following items can be displayed/configured through the UPS page; however, different UPS
models may have different items displayed/configured.
[UPS->Status] Display the basic information about the current UPS status. Items displayed are auto
refreshed.
Item
Definition
Input
Status
The current status of the utility power supplied to the UPS.
Voltage
The current input voltage of the utility power supplied to the UPS.
Frequency
The current frequency of the utility power supplied to the UPS.
Output
Status
The current status of the output power the UPS is supplying to
connected equipment.
Voltage
The output voltage the UPS is supplying to the connected equipment.
Frequency
The output frequency the UPS is supplying to the connected equipment.
Load
The power draw of the connected equipment expressed as a
percentage of the total UPS load capacity. This is displayed as watts on
some UPS models.
Current
The output current the UPS is supplying to the connected equipment.
Non-Critical Load (NCL)
The present status of NCL outlets.
Battery
Status
The present status of the UPS battery.
Remaining Capacity
The present capacity of the batteries, expressed as a percentage of full
charge.
Remaining Runtime
The amount of estimated time that the UPS can supply power to its
load.
Voltage
The present voltage of the UPS battery.
System
Status
The present operating status of the UPS.
Temperature
The operating temperature of the UPS.