Owners manual

7
Cable Access
Cables can be routed through the top or bottom cable openings of the enclosure. To
access the cable opening, remove the two screws securing the cover you are removing
as shown below.
Grounding
An individual grounding connection per enclosure is strongly recommended. Failure
to follow may result in serious injury or death.
To connect the enclosure to the facility's ground, use the grounding nut in the
enclosure. The grounding point is marked in the enclosure with the ground symbol
shown below.
WARNING
To use the side with the threaded holes, unscrew the rack angles from the horizontal
mounting rails. Switch the rack angles to the opposite side of the enclosure while
ensuring that the rack unit numbers face outward. Screw the rack angles to the
horizontal mounting rails. Keep the desired mounting depth when switching the rack
angles.