Owners manual

Adjusting Rack Angles

Mounting Depth

The installed depth of the rack angles can be adjusted by unscrewing them from the

horizontal mounting rails. Move the cage nuts behind the upper and lower horizontal

rails to the desired depth as shown below. Depth of the rack angles can be adjusted in

3/4” (20mm) increments.

NOTE: Verify the rack angles are installed at the correct depth before installing equipment in the

enclosure.

Dual Mounting Holes

The rack angles have dual mounting holes, square holes for use with cage nuts and

#12-24 threaded round holes shown below.

Square holes

#12-24 threaded round holes