Owners manual

Reverse the Enclosure

The enclosure can be mounted in either a left, or right, swing-out direction. Ensure

that the enclosure is mounted in the best swing-open direction suited for the

application. Note that vertical rack angles may also need to be rotated in order for

the rack U numbers to be in the correct reading orientation.

Initial Enclosure Setup

Setup the following configuration options shown in this section before mounting the

enclosure on the wall.

Door and Side Panel Locks

The front door, rear frame, and side panel locks are keyed-alike. The lock locations

are shown below. Use the included keys to operate the locks.

NOTE: The enclosure is shipped with the door locked. To access the keys in the accessories bag,

open a side panel by pushing the black retention tabs inward as shown on page 5. Side

panels are shipped unlocked.

CAUTION