Manualshelf

Owners manual

ManualsBrandsCyberpowerPC ManualsGeneral Purpose BatteriesCyberPower BPL48V75ART2UTAA Extended Battery Module, TAA
12345678910
4
Copyright © 2009 CyberPower Systems, Inc.
1
2
3
Electrical Installation Guide
CAUTION: Before connecting the Battery Pack to the UPS, make sure the Circuit Breaker
(ON/OFF switch) on the back of the Battery Pack to the “OFF” position. It is necessary to put
two plugs into the corresponding sockets to avoid the fire risk of over-current.
Step 1: Make sure the Circuit Breaker (ON/OFF switch) on the back of the Battery Pack to
the “OFF” position.
Step 2: Connect the Battery Pack to the UPS.
Step 3: Connect the Battery Pack to wall power and connect the AC Input Inlet to the other
battery pack’s AC Output Outlet.
Step 4: Turn the Battery Pack power switch ON.
*For battery run time table information, visit www.CPSww.com
or contact.
One Battery Pack
Multiple Battery Packs