Owners manual

CyberPower Remote Management System

Appendix 3

RMCARD Adapter Guide

Remove the Adapter to go from an RMCARD305 to an RMCARD205

Step 1. Remove the

two screws from the

adapter holding the

card in place.

Step 2. Remove the

card from the adapter.

Step 3. Remove the

screw holding the

RMCARD305 front

panel to the card.

Step 4. Attach the

RMCARD205 front

panel to the card.

Add the adapter to go from an RMCARD205 to an RMCARD305

Step 1. Remove the

screw holding the front

panel to the card and

remove the

RMCARD205 front

panel.

Step 2. Screw on the

RMCARD305 front

panel to the card.

Step 3. Install the card

into the adapter.

Ensure that the card is

securely seated in

place.

Step 4. Use the two

tray screws to secure

the card to the adapter.

Note: The RMCARD Adapter Kit is not included with the RMCARD205. Please contact

CyberPower for ordering information or Technical Support.

Note: RMCARD205 is designed for the 43x18mm (1.69x0.71inch) SNMP card expansion port

of CyberPower PR and OR series UPS. RMCARD305 is designed for the 57x23mm

(2.24x0.91inch) SNMP card expansion port of CyberPower OL series UPS