Owners manual

CyberPower Remote Management System

Firmware Upgrade

By upgrading the Firmware, you can obtain both the new features and updates/improvements to

existing functionality. You can check the “Firmware version” on the [System->About] webpage.

There are two files to update in order to upgrade the firmware version.

Firmware upgrade files:

- A. cpsrm2scfw_XXX.bin

- B. cpsrm2scdata_XXX.bin

Note: Please do not turn the UPS off when processing the Firmware upgrade.

Method 1: Using FTP command

Use the following steps to upgrade the firmware:

1. Download the latest Firmware

2. Extract the file to “C:\”

3. Open a command prompt window

4. Login to the CyberPower Remote Management Card with FTP command, type

(1) ftp

(2) ftp> open

(3) To [current ip of RMCARD] [port]; EX: To 192.168.22.126 21

(4) Input USER NAME and PASSWORD (same as the administrator account in Web interface

default: ‘cyber’ or ‘admin’; ‘cyber’ or ‘admin’)

5. Upgrade the file A, type

ftp > bin

ftp > put A. cpsrm2scfw_XXX.bin

6. Upgrade complete, type

ftp > quit

7. The system will reboot after you type “quit”

8. Login to the FTP again as step 4.

9. Upgrade the file B, type

ftp > bin

ftp > put B. cpsrm2scdata_XXX.bin

10. Upgrade complete, type

ftp > quit

11. The system will reboot after you type “quit”