Owners manual

CyberPower Remote Management System
1
Introduction
Overview
The CyberPower Remote Management Card allows for remote monitoring and management of a
UPS attached to a network. After installing the hardware and configuring an IP address, the user can
access, monitor, and control the UPS from anywhere in the world! Simply use a web browser such
as Internet Explorer or Firefox to access your UPS. Servers and workstations can be protected by
the UPS utilizing PowerPanel
®
Business Edition Client to gracefully shutdown when signaled by the
Remote Management Card.
Features
 Real time UPS monitoring
 Remote management and configuration of UPS via Web Browser or NMS
 Trigger servers/workstations to shutdown during a power event to prevent data lose or corruption
 Schedule shutdown/start-up/reboot of the UPS via remote control
 Event logging to trace UPS operational history
 Graphic data logging for analyzing power conditions
 Save and restore configuration settings
 Event notifications via Email, SNMP traps, Syslog, and SMS
 Support IPv4/v6, SNMPv1/v3, HTTP/HTTPs, DHCP, NTP, DNS, SMTP, SSH, Telnet, FTP, and
Syslog protocol
 Support Email Secure Authentication Protocols: SSL, TLS
 Support External Authentication Protocols: Radius, LDAP, LDAPS, Windows AD
 SNMP MIB available for free download
 User upgradeable firmware
 Bulk firmware upgrade tool
 Multiple-language user interface
 Quick installation
 Cisco EnergyWise
 Support Environmental Sensor (ENVIROSENSOR)
System Requirements
 An Ethernet connection to an existing network
 NMS (Network Management Station) compliant with SNMP (for optional NMS management)