Owners manual

CyberPower Remote Management System

segment.

• 192.255.255.255: Access only by an NMS on the 192 segment.

• 0.0.0.0 (the default setting) or 255.255.255.255: Access by any

NMS on any segment.

Authentication Type

The hash type for authentication.

Privacy Type

The type for encrypting and decrypting data.

Note: The privacy protocol cannot be selected if no authentication protocol is selected

[System->Network Service->Web Service] Select Enable to allow access to the HTTP or HTTPS

Service and configures the TCP/IP port for them. Use the “Valid Certificate” to browse the detailed

information of HTTPS Certification; use the “upload Certificate” to upload and replace the HTTPS

Certification.

Note: The format of uploading certificate must in a standard PEM (Privacy Enhanced Mail).

[System->Network Service->Console Service] Selects Enable to allow access to the Telnet or

SSH Service and configures the TCP/IP port that Telnet or SSH uses to communicate.

Note: To enhance security, users can change port setting to any unused port from 5000 to

65535. Users must then specify the non-default port to obtain access. Telnet clients

require users to append either a space and the port number or a colon and the port

number to the command line to access the control console.

[System->Network Service->FTP Service] Allows users to Enable/Disable the FTP server service

and configure the TCP/IP port of the FTP server (21 by default).

Note: The FTP server is used for upgrading Firmware. For more details about the upgrade

process, please refer to “Firmware Upgrade” section.

[System->Notifications->Event Action] Display the event actions for each event. Users can click

on the event to modify its action. When a specific event happens, the user can be notified by the

corresponding method according to this list.

• Log: Record the event in the “Event Logs”.

• E-mail: Send an email to a specific user (An available SMTP server is necessary).

• Trap: A SNMP trap sent to a specific IP address.

• SMS: Send a short message to a specific mobile phone number (An available SMS service

provider is needed).

[System->Notifications->SMTP Server] After setting the proper SMTP server, event notification

email can sent to recipients when specific event occurs.

Item

Definition

Server's IP/Host Name

The IP or Host Name of SMTP server used to notify users by E-mail.