Owners manual

CyberPower Remote Management System
19
[Logs->Maintenance] This page is used to maintain “Event Logs” and “Status Records”. The
application provides information on how many events have been recorded before it is full.
Item
Definition
Event Logs
Clear All Logs
Clear the existing event logs.
The Number of Events
The number of existing event logs/the max number of event logs.
Save Event Logs
Save the existing event logs as a txt file.
Status Records
Recording Interval
Set the frequency to record the status data. A smaller interval will
provide more frequent recordings but maintain them for a shorter
period. A larger interval will provide less frequent recordings, but
maintain them for a longer period.
Clear All Records
Clear the existing status records.
Remaining Time
The remaining recordable time base on the recording interval.
Save Status Records
Save the status records as a txt file.
Note: Some old event logs/status records will be cleared automatically when there is no
space to record.
[Logs->Syslog] Allow users set syslog server and send test message.
Item
Definition
Syslog
Enable send event logs to Syslog server.
Facility Code
Select Syslog facility.
Server IP Address
The IP address of Syslog server.
Server Port
The UDP port used by the Syslog server.
Send Test
Send informational message to syslog server.
[System->General->Time] Current Settings: Displays the current date and time on the card and
also display the status and rest time to update with Network Time Protocol (NTP). To set the date
and time, users can choose to set manually or by using the NTP (Network Time Protocol) server.
System Time Configuration:
Choose the Time Zone of your location in GMT (Greenwich Mean Time) first, and
• Using NTP server: Enter the IP address/domain name of NTP servers, choose the time zone,
and set the frequency to update the date and time from NTP server. Click "Update right now" to
update immediately.
• Manual Setup: Enter the date and time in the designated format.