Owners manual

CyberPower Remote Management System
17
[Envir->Status] Display the basic information of the environmental sensor and connected devices.
Item
Definition
Information
Name
The name of the environment sensor.
Location
The location of the environment sensor.
Temperature
Current Value
The current temperature of the environment.
Maximum
The highest temperature as well as the time of occurrence detected by
the environment sensor.
Minimum
The lowest temperature as well as the time of occurrence detected by
the environment sensor.
Humidity
Current Value
The current humidity of the environment.
Maximum
The highest humidity as well as the time of occurrence detected by the
environment sensor.
Minimum
The lowest humidity as well as the time of occurrence detected by the
environment sensor.
Contact
Display the name and status (Normal/Abnormal) of contacts.
[Envir->Configuration]
Item
Definition
Information
Name
The name used to identify the environment sensor.
Location
The place where the environment sensor is located.
Temperature
High Threshold
Upper limit for normal temperature.
Low Threshold
Lower limit for normal temperature.
Hysteresis
The difference between High/Low Threshold and the point where the
temperature state is from abnormal to normal.
Rate of Change
The rate used to define abnormal change of temperature.
Unit
The unit of temperature.
Humidity
High Threshold
Upper limit for normal humidity.
Low Threshold
Lower limit for normal temperature.
Hysteresis
The difference between High/Low Threshold and the point where the
humidity state is from abnormal to normal.
Rate of Change
The rate used to define abnormal change of humidity.
Contact
Name
The name used to identify the contact.
State
The state used to define normal condition of the contact