Owners manual

CyberPower Remote Management System
16
[UPS->EnergyWise] The EnergyWise initiative focuses on reducing the energy consumption of all
devices connected to a Cisco network. Through this compatibility, the CyberPower Remote
Management Card is recognized to work with other EnergyWise-enabled entities and can be easily
monitored and controlled to achieve the best energy performance under the EnergyWise operation
framework.
Item
Definition
Configuration
EnergyWise
Enable CISCO EnergyWise support.
Service port
The port number used to communicate with EnergyWise solution (must
the same as switch).
Domain Name
The domain name of the EnergyWise solution (must the same as
switch).
Off-State Cache
Enable/Disable endpoint entry to cache in the switch energywise list
after reboot.
Secure Mode
Enable EnergyWise use of a shared secret.
Shared Secret
The secret for the EnergyWise domain.
Node List
EnergyWise Children List page shows all EnergyWise entities and
provides users to configure EnergyWise Entity attributes.
Name
The name used to identify each outlet.
Role
This parameter is a string used to describe the function of the entity
(max length 31 characters).
Keywords
This parameter is a string used to describe the entity (max length 31
characters).
importance
This parameter is a value between 1 and 100 that shows the entity
importance high or low.
[UPS->PowerPanel
®
List] Display the Information of connected PPBE (PowerPanel
®
Business
Edition) Clients. The connection is executed by PPBE Clients and the listed clients will be removed if
disconnected for 1 hour.
Item
Definition
Configuration
Max Clients Shutdown
Time (MST)
The max time that all the connected clients required to shutdown.
Max Clients Shutdown
Delay Time (MSDT)
The max value required from utility power fails till all the clients are
shutdown.
[Envir] Following items can be displayed/configured through the Envir page.