Owners manual

CyberPower Remote Management System
9
[UPS] Following items can be displayed/configured through the UPS page; however, different UPS
models may have different items displayed/configured.
[UPS->Status] Display the basic information about the current UPS status. Items displayed are auto
refreshed.
Item
Definition
Input
Status
The current status of the utility power supplied to the UPS.
Voltage
The current input voltage of the utility power supplied to the UPS.
Frequency
The current frequency of the utility power supplied to the UPS.
Output
Status
The current status of the output power the UPS is supplying to
connected equipment.
Voltage
The output voltage the UPS is supplying to the connected
equipment.
Frequency
The output frequency the UPS is supplying to the connected
equipment.
Load
The power draw of the connected equipment expressed as a
percentage of the total load capacity. This is displayed as watts on
some UPS models.
Current
The UPS output current in amps.
Non-Critical Load (NCL)
The present status of the NCL outlet.
Battery
Status
The present status of the battery packs.
Remaining Capacity
The present capacity of the batteries, expressed as a percentage of
full charge.
Remaining Runtime
The amount of time that the UPS can supply power to its load.
System
Status
The present operating status of the UPS.
Temperature
The temperature inside the UPS.
[UPS->Information] Provide the technical specifications of the UPS.
Information
Description
Model Name
The model name of the UPS.
Serial Number
The serial number of the UPS.
Voltage Rating
The output voltage rating (Volts) of the UPS.
Working Frequency
The frequency of the UPS output power.
Power Rating
The Volt-Amp rating of the UPS.
Current Rating
The output current rating (Amps) of the UPS.
Load Power
The power rating (Watts) of the UPS.
Battery Voltage Rating
The DC voltage rating of the battery set.