User Manual

68
MODULE_INVERTER_PROTECTED
1
Module inverter is protected.
BATTERY_REVERSED
The polarity of battery is
reversed.
BYPASS_SEQUENCE_ERROR
The phase sequence of
bypass is wrong.
COMMUNICATION_FAILURE
4
LOST_IN_LOCAL
Local communication lost.
LOST_IN_NETWORK
3
Network communication lost.
FAULT
4
GENERIC_FAULT
UPS is faulty.
BYPASS_FAN_FAULT
Bypass fan is faulty.
BYPASS_FAULT
Bypass is faulty.
MODULE_RECTIFIER_FAULT
1
Module rectifier is faulty.
MODULE_INVERTER_FAULT
1
Module inverter is faulty.
MODULE_FAN_FAULT
1
Module fan is faulty.
NO_BATTERY
Batteries are not present.
RUNTIME_INSUFFICIENT
Available runtime is
insufficient.
UTILITY_FAILURE
Utility power failure.
URGENT_COMMUNICATION_
FAILURE
4
LOST_IN_LOCAL
Local communication lost in a
power event.
LOST_IN_NETWORK
Network communication lost in
a power event.
RUNTIME_WILL_EXHAUST
Remaining runtime will be
exhausted.
OUTPUT_WILL_STOP
The output power is going to
stop soon.
INPUT_NEAR_OVERLOAD
2
Input is near overload.
INPUT_OVERLOAD
2
Input is overloaded.
SHUTDOWN_TIME_
INSUFFICIENT
2
Shutdown time is in
insufficient.
ATS FAULT
5
ATS is faulty.
ALL_SOURCE_FAILURE
5
Both input sources have power
loss, ATS will not change input
source
CURRENT_SOURCE_FAILUR
E
5
ATS has automatically
switched to redundant power
source.
REDUNDANT_SOURCE_FAIL
URE
5
ATS redundant power source
has experienced a power
failure.
ENV_SENSOR_LOST
6
Environmental sensor is not
responsive.
ENV_SENSOR_OVERHEAT
6
Temperature is over the high
threshold.
ENV_SENSOR_UNDERCOOL
6
Temperature is under the low
threshold.
ENV_SENSOR_OVERWET
6
Humidity is over the high
threshold.
ENV_SENSOR_OVERDRY
6
Humidity is under the low
threshold.
POWER_LOST
Power supply redundancy has
been lost.
MBO_OUTLET_OVERLOAD
7
A PDU outlet is overloaded.
MBO_OUTLET_NEAR_OVERL
OAD
7
A PDU outlet is near overload.
1
: This event only occurs for the Modular UPS in Agent.
2
: This event only occurs for the PDU in Client.