User Manual

64
Energy Settings
In this page, we can set the average rate of power consumption and carbon emission by selecting the country, or
assign and apply a customized rate. When rates are updated, the information displayed in the energy reporting page
will also be updated.
Country Selection
Power costs vary by country, therefore the Energy Cost and equivalent carbon emission are different. By selecting
country, users can set up the average rate of power consumption and carbon emission.
 Country: Select the country the UPS is located in.
Energy Cost
Because the rate of power consumption can vary over time, users can assign rates for different periods of time.
 Cost per kWh: Assign and apply the rate as of today, inclusive.
 Show energy cost history: Display and setup the associated costs of historical periods. When the historical period
of energy cost is shown, users can double click on any period to add or change the period and rate. See below.