User Manual

63
Energy Consumption
(The content in this section is only applicable to PowerPanel Business Edition Agent.)
Energy Reporting
This page presents the information such as the amount of power, cost and equivalent carbon emission that the UPS
system consumes in a period of time. The cumulative amount of power consumed by a UPS system in a period of
time is denoted as Pm. Users can setup the cost per kWh, denoted as Rp, in the Settings Page. Carbon emission per
kWh, denoted as Rc, is also shown in the Settings Page. Finally, the system calculates and presents the power
consumption cost denoted as Cp and the equivalent carbon emission, denoted as Ec, based on the following formulas:
Cp = Pm * Rp and Ec = Pm * Rc
Statistic
 From Start Date To End Date : Set the time consumption period to read
 Average Energy Consumption : Displays the average energy consumption according to the selected time period
 Cumulative Energy Consumption : Displays the cumulative energy consumption according to the selected time
period
 Cumulative Cost : Displays the cumulative cost according to the selected time period
 CO
2
: Displays the equivalent carbon emission according to the selected time period.
UPS
This section will only appear when Power Panel Business Edition software is linked with a UPS that supports
cumulative energy in the LCD screen.
 Cumulative Energy: Present the cumulative energy data stored in the UPS.