Manualshelf

User Manual

ManualsBrandsCyberPower ManualsComputer Accessories & PeripheralsCyberPower PR1500LCD Smart App Sinewave UPS System, 1500VA/1050W, 8 Outlets, AVR, Mini-Tower
61626364656667686970
59
ATS: Indicates the computer is plugged into an ATS PDU.
Network PDU: Indicates the computer is plugged into a PDU with network connection.
UPS with Network PDU: Indicates the computer is plugged into a network PDU, which is a powered by a
UPS.
UPS with Generic PDU: Indicates the computer is plugged into a generic PDU, which has no network
connection and is powered by a UPS.
UPS Address: Assigns the network address of the UPS. Enter the IP address or use the drop down menu to
show the device list and select a device address from the list. Clicking the refresh button causes to search the
network to update the results. If a UPS communicates with a computer that has PowerPanel Business Edition
Agent installed, assign the IP address of the computer as the UPS network address. This option appears when the
Power Connection is set with the UPS option.
When the Power Connection is set with the ATS option, two UPS addresses will appear to be assigned. If an
input source for the ATS is a UPS, the network address of that UPS should be assigned to that field. A UPS
address field which is left blank, indicates that the ATS does not use a UPS as an input power source.
Move the cursor over the target address to display details about the device
The computer searches the network and uses the device with the least uptime as the default device after an
installation. One available outlet will automatically be assigned as powering the connected computer. If no outlet is
available, the first critical-load outlet will be assigned as being used by the computer.
The uptime of the devices indicates the length of time that the device has been functioning without interruption.
When the computer scans the network, the device with shortest uptime will be marked a yellow star icon. You can
press the Reset button for 1 second to reset the uptime of device. This will make the device have the top priority.
Do not press the reset button for more than 4 seconds. Otherwise, it will be recognized as a complete
configuration reset demand.
If the target device is not available in the device list, change scanning range on the Preferences/User
Experience page by clicking Change scan range shortcut.