User Manual

56
Power
(The content in this section is only applicable to the Client.)
The Client can interact with a UPS or a PDU through a network interface. If the UPS has no remote management card,
the Agent can be installed on a single computer which is using a USB or a serial connection directly to the UPS in
order to establish the network connection to the Client.
Information
Power/Information page
The Power/Information page shows information about the UPS/PDU/ATS which supplies power to the Client
computer. When the Client establishes communication with a PDU which is connected to a UPS, the Information
page displays the information about the PDU and the UPS individually. If the Client computer has redundant power
supplies, show the information of specific power supply by click the tab.
 Device Type: The type of the UPS/PDU/ATS, e.g. UPS/PDU/ATS.
 Model: The model name of the UPS/PDU/ATS.
 Serial Number: The serial number of the UPS/PDU/ATS.
 Firmware Version: The firmware version of the UPS/PDU/ATS.
 UPS Type: The type of the UPS. e.g. On-Line or Line Interactive.
 PDU Type: The type of the PDU. e.g. Monitored or Switched.
 ATS Type: The type of the ATS. e.g. Monitored or Switched.
 Power Rating: The Volt-Amp rating and power rating (Watts) of the UPS.