User Manual

31
 After the deployment task is complete, the PPBE virtual appliance will be added into the inventory.
 Click Power on the virtual machine to power on the virtual appliance.
 Login the virtual appliance. The default username and password are admin. In order to perform shutdown
accurately, you must change the time zone settings of the virtual appliance.
This can be a direct copy of the time zone file from the /usr/share/zoneinfo folder. We assume that the host is
located under the Chicago CST zone in Chicago, and the time zone can be changed by running the command cp
/usr/share/zoneinfo/America/Chicago /etc/localtime.
Installation on XenServer
The installer requires root permission to install the PowerPanel
®
Business Edition. Mount CD by running mount –t
iso9660 /dev/cdrom /mnt/cdrom as a root user (/dev/cdrom is the CD drive and /mnt/cdrom will be the mount
point.). Browse the CD drive and run ./ppbe-linux-x86.sh command to initiate an installation procedure.
Installation must be launched on the Dom0. Refer to Installation on Text Mode section to complete the installation.
Agent should be installed on the Dom 0 of XenServer 5 or later versions. Citrix XenServer 5.0 and later versions
support USB device. Before installing Agent with the USB or serial connection, make sure that the platform running
the Agent supports USB or serial connection.