User Manual

15
 Choose the component. If one single computer is connected to the UPS directly via a USB or serial connection,
Agent should be installed. If the computer is powered by a UPS already connected to an Agent, has a remote
management card installed or is connected to a PDU, Client should be installed. If the administrator requires
simultaneous monitoring and access to multiple UPS/PDU/ATSs, equipment and computers on a local network,
Center should be installed.
If a user is unsure of which are the correct components, they can click the Use recommendations button to launch
a wizard for assistance.
Note: Agent and Client cannot be installed on the same computer.
 Select power devices. Users must select which power device provides the power protection to the target
computer.