User Manual

163
You can also enter the URL, http://hosted_computer_IP_address:3052, in the address filed of the web browser
from a remote computer.
On Linux, you only enter the URL, http://localhost:3052, the address field of the web browser from a remote
computer for a local access. You can also enter the URL, http://hosted_computer_IP_address:3052, in the
address filed of the web browser from a remote computer.
3. Which operation systems are supported by PowerPanel
®
Business Edition software? And which browser
supports them?
Refer to the Getting Started/Prerequisites for more details.
4. My Client computer connects to a PDU. How do I ensure the IP address assigned on the
Power/Configuration page matches the actual PDU IP address? How do I ensure the outlet configured on
the Power/Configuration page matches with the actual connection?
Click the Identify button at the Outlet block screen. The PDU LCD screen will blink the outlet number on the
connected PDU. The PDU IP address can be verified by pressing the select button on the PDU until the IP
address displays on the LCD.
5. What is the difference of the NCL (Non-Critical Load) outlet and CL (Critical Load) outlet? Which
equipment should connect to NCL outlet or CL outlets?
The NCL outlets are only available on specific UPS models and are designed to be powered off early to maximize
the battery runtime for the CL outlets. Non-critical equipment such as redundant equipment ,monitors, or other
non-critical equipment should be connect to the NCL outlets to be powered off early. This will maximize the
battery runtime for critical equipment such as servers on the CL outlets.
6. The UPS/Load page allows users to establish communication with the Client by assigning the Client's IP
address. Are there other ways to establish communication?
Communication can be established by assigning the Agent's IP address on the Device Network Address section
on the Power/Configuration page in the Client. See the Power/Configuration for more details about how to
establish the communication with the Agent.
7. How can I make PowerPanel
®
Business Edition run a program when a particular event has occurred?
Create a .cmd file and save it into the extcmd folder of PowerPanel
®
Business Edition installation folder. Then
write a command to run your own programs into this script file. Please refer to the default.cmd in the extcmd
folder to write your own script.
8. I am not sure what the IP address of the UPS/PDU/ATS is. How can I obtain the correct IP address?
Use the Power Device Network Utility tool to help you to find the correct IP address of UPS/PDU/ATS. This
device list will list the all CyberPower device’s IP address on the local network.
9. How do I uninstall PowerPanel
®
Business Edition?