User`s manual

CyberPower Systems, Inc.

Trouble Shooting

Need Additional Help?

Feel free to contact our Tech Support department with installation, troubleshooting, or

general product questions at support@cpsww.eu.

CyberPower Systems Inc.

www.cpsww.eu

Reproduction in whole or in part without permission is prohibited.

Problem Possible Cause Solution

The UPS LCD does

not perform

expected runtime.

Do not set the UPS

to recognize the

battery pack(s).

By pressing the display toggle to

select functions. Then, set up the

correct battery pack numbers. The

default setting is 0.

The battery pack

does not work.

Batteries are not

fully charged.

Allow the battery pack to charge for

24 hours. Do not expect full runtime

during this initial charge period.

Specified battery pack models can

use AC to shorten charge time.

The status of circuit

breaker is off.

Switch on the circuit breaker.

The fuse blew.

Contact CyberPower Systems.

Open the cover on the rear panel

and replace the new fuse.