User`s manual

10
Copyright © 20
12
CyberPower Systems, Inc.
Step 2: Configure the UPS to recognize the Battery Packs
Press the Select button until the UPS
displays a screen that shows a number
(0-10) with an “A” suffix. The number 0-10
indicates how many battery packs are
attached. The default is zero.
To change this number, press and hold the
Select button for four seconds. Now, simply
press the Select button and change the
number to match how many Battery Packs
you have attached to the UPS. Example: If
you have three Battery Packs attached, set
the number to 3.
To save the changes, press and hold the
Select button for four seconds. This will
return you to the main menu on the UPS.