Specifications

3
cpsww.com
UPS SYSTEMS
This listing is intended as an overview of the many innovative features found in
various CyberPower UPS systems. The features listed below are not available
with all UPS models. A comprehensive list of features and specifications for
each UPS model can be found on our website at cpsww.com.
Active PFC Compatibility
CyberPower UPS systems with pure sine wave output prevent unexpected
shutdowns or component stress which may occur when devices with Active
PFC power supplies are connected to an entry-level UPS that provides
simulated sine wave power. See page 28 for more details.
Automatic Voltage Regulation (AVR)
Stabilizes AC voltages to maintain safe voltage levels without switching to
battery mode, thereby conserving battery life and delivering cleaner AC power
to connected equipment.
Connected Equipment Guarantee
CyberPower will repair or replace properly connected equipment if it is ever
damaged by a surge, including surges due to lightning strikes. Refer to the
warranty section of the device manual for more details.
Convertible Rack/Tower Configuration
Units can be set up horizontally or vertically, except 1U, and each unit ships with
a rack mounting kit and tower stands.
Critical Load Outlets
During a power outage or overload, critical load outlets ensure continuous
power to essential equipment. Systems with PowerPanel
®
Management
Software allow programmable control of these outlets, including scheduled
shutdowns and restarts.
Emergency Power Off Port (EPO)
EPO is a protection feature that can be used to instantly cut power to
equipment in the event of fire, flood, overheating or any other emergency where
it may not be possible to access the main disconnect device safely.
Generator Mode
During extended power outages, UPS models with this feature handle generator
output aberrations as the generator and its loads go through initial ramp-up to
full operation, preventing data corruption or shutdown of connected equipment.
GreenPower UPS
™
Technology
Patented advanced circuitry reduces UPS energy consumption, heat buildup
and overall UPS energy costs. See page 22 for more details.
Hot-Swappable Batteries
Eliminate power-related downtime and ensure maximum power availability. All
potential UPS maintenance, including complete power module exchange, can
be performed without powering down connected equipment.
Industry-Leading Three-Year Warranty
CyberPower will repair or replace damaged units within three years of purchase
date—including dead batteries—a first for the UPS industry.
LCD Control Panel
The LCD interface allows users to check the status of the UPS, configure
settings, review event logs, disable alarms and more. See page 10 for
more details.
Multifunction LCD Display Panel
The LCD displays vital UPS status information, such as input voltage level,
output voltage level, automatic voltage regulation, battery capacity, runtime
estimate, load level, output frequency, on battery, overload, fault condition and
silent mode—depending on model. See page 24 for more details.
Multiple Communication Ports
Communication is offered via multiple HID-compliant USB ports and serial
ports, including remote monitoring using a standard web browser or network
management system, with the addition of an optional SNMP/HTTP remote
management adapter—depending on model.
Power Management Software
PowerPanel
®
software is included with CyberPower UPS systems. In the event
of a power loss, PowerPanel Personal Edition ensure connected devices shut
down safely. PowerPanel Business Edition gives administrators the tools for full
local and remote control. See page 37 for more details.
RoHS & WEEE
Every CyberPower device is manufactured in accordance with the Restriction
of Hazardous Substances (RoHS) directive by the European Union, mandating
environmentally safe procedures and restricting the use of lead, cadmium,
mercury, hexavalent chromium, PBB and PBDE. CyberPower manufacturing
processes adhere to the Waste Electrical and Electronic Equipment (WEEE)
directive, issued by the European Union, encouraging the collection, treatment,
recycling and recovery of electrical waste and discarded electronic equipment.
Selectable Output Voltages
Certain high capacity CyberPower UPS models may be configured to output
200V, 208V, 220V, 230V and 240V ± 2%.
Surge Protection with Automatic Shutdown
Limits the impact of both externally and internally generated high-voltage
power spikes by restricting them to an acceptable level. If an electrical surge or
spike exceeds the system’s ability to suppress the electrical signal, the surge
protector will shut the UPS down to safeguard all connected equipment.
See page 34 for more details.
TAA Compliant
CyberPower manufactures products that are certified compliant with the U.S.
Trade Agreements Act (TAA) and listed on the GSA Schedule Contract for
approved use in government installations. Look for this 3 symbol for models
that are TAA compliant.
Ultra-Quiet Design
Efficient design, advanced system components and GreenPower UPS
™
Technology help minimize sound emissions for a quieter work environment.
UL Standards
All CyberPower UPS systems are manufactured and certified by Underwriters
Laboratories (UL) passing strict testing requirements to ensure the highest
electrical safety standards and performance.
Product Line Features