Specifications

15
cpsww.com
DOUBLE-CONVERSION
Smart App Online
1kVA – 3kVA Tower & Rack/Tower Convertible OL Models
Total Protection
The total power load of connected equipment to be protected by an installed
UPS and the expected runtime of the unit are two key factors in determining
what size UPS (in terms of its VA/Watt rating) is best suited to a particular
application. If it is anticipated that additional devices will be connected to the
UPS in the future, thus increasing the power load, this should be considered
as well.
Estimating expected UPS runtimes can be challenging, particularly in areas
where the consistency of the utility power is not well known. Selecting a
UPS with a load capacity 30-35% above the required power load offers the
advantage of longer runtimes, thereby adding what could prove to be an
important margin of safety to an installation’s power protection. While the
initial outlay for a UPS increases with its size, due to the higher capacity
components required, operating costs are typically lower in the long run
because component wear and tear is reduced when the UPS operates below
maximum capacity. The ability to provide longer runtimes is also added
insurance against a potentially lengthy power outages.
In addition to extended runtimes, sizing a UPS to run at loads that are
significantly lower than its capacity also effectively increases battery life,
minimizing the likelihood of battery failure, a leading cause of load loss.
Higher Capacity UPS for Longer Runtimes
Typical Applications
•Corporate Data Centers
•Corporate Servers
•Network and Storage Devices
•Complex Security Systems
•PBX and VoIP Installations
Features
•Double-Conversion Topology
•Pure Sine Wave Output
•Removable LCD Control Panel
•Fast Charge Technology
•Selectable Output Voltages
•Generator Mode
•GreenPower UPS ECO Mode
•PowerPanel Business Software
Waveform Output
Smart App Online rack/tower UPS models provide pure sine wave output to mission-critical
servers and equipment requiring seamless power correction. Equipped with Double-
Conversion topology, these units offer generator compatibility and deliver clean AC power
with zero transfer time.
Key User Benefits
Removable LCD Control Panel — Easily check 43 different UPS statuses and customizable
operating settings from up to ten feet away, with optional cable, when the UPS is installed in a
hard-to-reach location.
Extended Battery Modules (EBM) — Expand runtime and restore full backup power faster
with EBMs featuring Fast Charge Technology.
Hot-Swappable Batteries — Eliminate downtime with hot-swappable batteries.
Smart Battery Management (SBM) — Reduce heat and improve UPS battery life up to
five years with the three cycle battery charging system.
Rack/Tower Versatility — Adapt to changing needs with horizontal rack or vertical tower
installation options.
GreenPower UPS
™
ECO Mode — Save on electrical and cooling costs by using the
configurable ECO Mode to improve UPS efficiency up to 93%.
Remote Management — PowerPanel
®
Business Edition management software provides unsurpassed
control and protection of the UPS and connected equipment and allows for remote management of the
protected devices on the network.