User's Manual

25
8. Upgrade complete, type
- ftp > quit
9. The system will reboot after you type “quit”.
Note: You can check to see if the firmware upgrade is successful
by checking the “Firmware version” on the [System->About]
screen via web UI.
Option 2: Single or Multiple Device Upgrade (recommended)
Use the following steps to upgrade the firmware.
1. Download the Upgrade and Configuration Utility from
www.cyberpower.com.
2. Open Upgrade and Configuration Utility from Start > All
Programs > CyberPower Upgrade and Configuration Utility.
3. Wait for search to finish (Shown in Figure 1).
Figure 1
4. Check the checkbox to select devices listed in the Operation
View (Shown in Figure 2).
Figure 2
5. Make sure Account and Password are valid on selected devices
(Shown in Figure 3).
Figure 3
Firmware Upgrade