User`s manual

CyberPower Network Management System

Step 2. Configure the IP address for the CyberPower Network Management Card.

Method 1 : Using the SNMP Card Configuration Tool

1. Install the SNMP Card Configuration Tool from the included CD. Double click the “SNMP

Card Configuration Tool” installation file, “Setup.exe” from“\tools\wsnmpcfg” folder on the

CD-ROM drive.

2. After the installation completes run the “wsnmpcfg” program under “All Programs”->“SNMP

Card Configuration Tool”.

3. The main dialog of the “SNMP Card Configuration Tool” program is shown in Figure. 1. The

configuration tool will display all the SNMP cards present on the network. The "Refresh"

button is used to search the entire local network for SNMP cards.

Figure 1. The main window of the “SNMP Card Configuration Tool” program.

4. Select the card and choose “Setup as selected” under the ”Tool” menu or double click the

SNMP card you want to configure.

5. You can modify the new IP, new subnet mask, and new gateway address using the IP or MAC

address in the SNMP card setting window, as shown in figure 2.

Figure 2. The SNMP card setting window.