User`s manual

CyberPower Network Management System
1
INTRODUCTION
Overview
The CyberPower Network Management Card is an external card that allows remote monitoring
and control of a UPS on a network. After installing the hardware and configuring an IP address,
the user can access, monitor and control the UPS from anywhere in the world! No software
installation is needed. Simply use a web browser such as Internet Explorer or FireFox to access
your UPS. Servers and workstations protected by the UPS can be installed with PowerPanel
Shutdown Service software to utilize the additional remote shutdown features of the Network
Management Card.
Features
z Remote management and configuration of UPS via Web Browsers or NMS
z Supports TCP/IP, UDP, SNMP, HTTP protocols
z Automatic events notification via SNMP Traps
z Flexible Event Action setting
z Auto-shutdown to protect servers and workstations from data loss due to power failure
z Schedule shutdown/startup/reboot of UPS remotely
z Event logging to trace UPS operation history
z SNMP MIB provided
z 10Mbps Ethernet compatible
z Quick installation and user friendly interface
z Security management provided
System Requirements
z A computer with a Windows Operating System (for optional Power Panel Shutdown Service)
z An Ethernet cable connection to an existing network
z NMS (Network Management Station) compliant with SNMP (for optional NMS management)
z A RS232 cable to connect the CyberPower Network Management Card with the UPS
Application: