User`s manual

CPS3500&CPS5000 Series

BASIC OPERATION

DESCRIPTION

1. AC Outlets

EPS PRO/PIE Series have two general plug-in outlets (UK/Schuko/ France) and one terminal outlet for

connected equipment which ensures temporary uninterrupted operation of the equipment during a power

failure. Max. Output of 1a is 40A ; Max. Output of 1b is 12A for UK socket, 16A for Schuko/France socket.

Max. Output wattage of (1a+1b) is 2450W (CPS3500PIE/CPS3500PRO/CPS3500STD Series)/ 3500W

(CPS5000PIE /CPS5000PRO/CPS5000STD Series).

*Note: Maximum cord length is 10 meters and the cable O.D. must be 10AWG

(CPS3500PIE/CPS3500PRO/CPS3500STD & CPS5000PIE/CPS5000PRO/CPS5000STD Series) or

greater.

2. AC Inlet

AC input terminals

*Note The O.D. of the distribution cables must be 10AWG (CPS3500PIE/CPS3500PRO/CPS3500STD

& CPS5000PIE/CPS5000PRO/CPS5000STD) or greater.

3. DC Inlet

Battery input terminals

*Note Maximum battery wiring cable length is 2 meters and the cable O.D. must be 4AWG or greater.

4. DC Circuit Breaker

Located on the side of the EPS, the circuit breaker serves to provide overload and fault protection.

5. AC Output Circuit Breaker

Located on the side of the EPS, the circuit breaker serves to provide overload and fault protection.

* STD Series only use soft pad

CPS3500PRO/CPS5000PRO

CPS3500PIE/CPS3500STD

CPS5000PIE

/CPS5000STD