User's Guide

Appendix B. PanelSense APS-FPD
B.12
Using ParticleSpectrum with Linked Devices
Normal operation as listed in Chapter 3 on page 3.4 should be followed for starting and
recording a measurement run. All settings options (Measurement Options, Device Options,
Display Options, Graph Options, and Output Folder) affect all devices that are linked
together.
To run linked devices:
• Begin a measurement run by selecting the Start icon. The devices will begin to chart on
the graph with the assigned color associated with the device. When the measurement run is
complete, Average and Instantaneous charting results will be shown for all linked devices.
• The Particle Measurements Menu in the Device Window will give you the same options
to review the Averaged Results, Instantaneous Results, and Accumulated Particle
Counts. You will also be able to view all devices, or select the specific device.
Result / Count Type Device SelectionMenu
Figure B.11: Using Linked Devices