User's Guide

Appendix B. PanelSense APS-FPD
B.4
Installing the SENA Link Hardware
Before starting the wireless link installation, complete the Installing the WaferSense APS
Software,” on page 2.2. The ParticleSpectrum Software must be installed prior to connecting
and installing the SENA Link. Locate the SENA Link USB module.
Note: If remote positioning of the SENA Link is desired, use the included 3 meter
USB cable. If extended radio range is desired, use the extended range antenna on the
end of the SENA Link module.
If your computer has an onboard Bluetooth radio, you must disable it in the Device Manager
before installing the SENA Link.
To disable/enable onboard Bluetooth:
1. Right click on the Windows Start button and select “Device Manager”
Extended Range
Antenna
3 Meter USB
Cable
SENA Link
Figure B.2: SENA Link Components
Figure B.3: Device Manager Dialog