User's Guide

Chapter 2. Installing Your APS3
2.8
Running the ParticleSpectrum Application
To start the ParticleSpectrum application:
1. From the Windows Start > Programs menu, choose CyberOptics >
ParticleSpectrum. The ParticleSpectrum application starts, as shown in Figure 2.5.
Initializing communications usually takes less than a second. For information on using
ParticleSpectrum, see Chapter 3 “Using Your APS3.” If the APS3 device has not been
registered, ParticleSpectrum will display the Calibration Registration dialog. To complete
the registration, proceed to the next step.
Figure 2.5: Starting the ParticleSpectrum Application
Default View
Default View with Device List on the Left side. The
device list can be enable and minimized by selecting
the arrow icon above Device List