User's Guide

Chapter 2. Installing Your APS3
2.5
Installing the Wireless Link
Before starting the wireless link installation, complete “Installing the WaferSense APS Software,”
on page 2.2.
To install the wireless link:
1. Turn on your computer.
2. Locate an unused, high-power USB port on your computer. The APS3 wireless link
module requires a high-power USB port, such as the built-in ports on your computer and
ports on USB hubs that have power cords. Unpowered USB hubs won’t work.
3. The USB cable provided with your APS system has a different plug on each end. Locate
the end with the plug that matches the USB port on your computer and plug the cable
into the port.
4. Plug the other end of the cable into the link module.
Windows automatically finds the drivers installed during the Link Device Installer in
Figure 2.3 and Figure 2.4 on page 2.4.
The Power light on the module turns on indicating that the module is getting power from
the USB port. Ignore the Pair Status and Connection Status lights for now.