Technical data

NetGenie
Power Cable
Laptop Or Desktop Computer
USB Modem
5
2. Use the RJ-45 Ethernet cable provided with the NetGenie appliance to connect your computer to any of
the “LAN” NetGenie sockets.
3. Switch on your NetGenie appliance. Wait till the Power LED and WAN LED turns green.
4. Switch on your computer now. NetGenie's “LAN” LED will turn green and remain steady.
5. Open your browser and start surfing the Internet. Your computer is now secured from online threats and
malware with the Quick Security feature automatically turned on.
To configure age-appropriate Internet access for your family, refer the Family Protection section.
If you are unable to connect to the Internet after following above procedure, please revert to your original
setup and visit Cyberoam’s support section at www.netgenie.net.
Note:
!
!
1. Plug a USB modem in the slot provided in the NetGenie appliance.
2. Use the RJ-45 Ethernet cable provided with the NetGenie appliance to connect your computer to any of
the “LAN” NetGenie sockets and switch on the NetGenie appliance.
OR
Switch on the NetGenie appliance. If you are connecting to the Internet over WiFi, start your laptop.
Make sure your Wireless Network Adapter is enabled. Your laptop will automatically detect the wireless
network (also called SSID) named “NetGenie”. If you have configured wireless networks in the past,
click the network icon in your machine's system tray (bottom-right of your screen) from where you can
view a range of available wireless networks. Select “NetGenie”.
After selecting “NetGenie”, you will be asked to enter the exact Security/Pass Key printed on the sticker
at the bottom of your appliance. This will connect you to the NetGenie appliance over WiFi.
3. Enter the IP address: http://10.1.1.1 in the address bar and access NetGenie by inputting your
administrator credentials.
4. Click Network Settings > Internet.
5. Select USB Modem and fill up the required details. Once the valid details have been entered and you
apply the configurations, NetGenie will automatically connect to the Internet.
6. Open your browser and start surfing the Internet. Your computer is now secured from online threats and
malware with the Quick Security feature automatically turned on.
To configure age-appropriate Internet access for your family, refer the Family Protection section.
If you are unable to connect to the Internet after following above procedure, please revert to your original
setup and visit Cyberoam’s support section at www.netgenie.net.
Note:
!
!
2
Section
Scenario 3
Secure Internet Connectivity using USB Modem