User`s guide

CyberLink YouCam

• Capture device: select the webcam device you want to use with CyberLink

YouCam from the drop-down list.

• Capture folder: set the capture folder where your captured photos and videos

are saved. To change the capture folder, select the button and select the

new folder location.

• Capture quality: select the quality of the captured video from the drop-down

list. The higher the quality selected, the larger the file size created.

• Capture resolution: select the size/resolution of captured video from the

drop-down list. The selection of a larger video size, will result in a larger video

file.

Note: CyberLink YouCam supports high-definition (1280×720) video if your webcam is

capable of outputting it. If your webcam is capable of high-definition output, the

1280×720 option is available in the Capture resolution drop-down.

• Capture format: select the file format for the video captured from the list.

• Audio device: select the audio device from the drop down list that you want to

use to capture audio with for your webcam, if required.

• Flip horizontally: select this option to flip the webcam image horizontally.

• Capture with audio: select this option if you want to capture webcam video

with audio.

Note: you will need to have a microphone connected to your computer or webcam to

capture webcam video with audio.

• Flip vertically: select this option to flip the webcam image vertically, i.e. upside

down.

• Countdown before capture: select this option to enable a three second

countdown before CyberLink YouCam captures photo snapshots or videos.

Snapshot Settings

Select the tab to display the following settings:

Snapshot

• No. of snapshots: in the field provided, enter in the number (between 1 and

10) of photo snapshots you want CyberLink YouCam to take. If you enter 1, the