User`s guide

Chapter 2: Using YouCam
17
Continuous Recording
The continuous recording option lets you set a recording that will continue,
uninterrupted, until the specified end time.
To enable a continuous recording, do this:
1. Select the button to display the Video Surveillance Settings.
2. Select the Continuous recording option and then specify the time you want
the recording to end in the fields provided.
3. Select Start. CyberLink YouCam begins to record the current webcam video.
Note: CyberLink YouCam will continue recording until the specified end time or when you
select the Stop button.
4. The captured video is placed in the captured content area and saved to the
capture folder specified in Capture settings.
Note: you can right-click on the captured video and select Locate File on Disk to view its
saved location on your computer.
Time-lapse Recording
When Time-lapse Recording is enabled, CyberLink YouCam will take a series of
snapshots at specified intervals. These snapshots are then placed together in a
video file, creating a video that uses time-lapse photography.
To enable a time-lapse recording, do this:
1. Select the button to display the Video Surveillance Settings.
2. Select the Time-lapse recording option and then specify the time you want
the recording to end in the fields provided.
3. Enter in the amount of time between captures in the Take a snapshot every
field.
4. Select Start. CyberLink YouCam will begin to capture snapshots of the webcam
video at the specified intervals.
Note: CyberLink YouCam will continue recording until the specified end time or when you
select the Stop button.