User`s guide

CyberLink YouCam
16
4. Once you are finished, select Stop and then Restore to return to the CyberLink
YouCam main window. If you were capturing a video in Stand Alone mode, the
video is placed in the captured content area.
Video Surveillance
CyberLink YouCam allows you to select from a number of video surveillance
options or timed recordings, which let you set a time when the recording will
automatically stop recording. You can also make a time-lapse recording or set up
your webcam to begin recording when it detects motion. Then once CyberLink
YouCam finishes recording, you can have the program automatically e-mail the
captured video to a specified e-mail address.
Motion Detection Recording
When motion detection recording is enabled, CyberLink YouCam begins a
recording if your webcam detects motion and then stops once the movement
ends.
To enable a motion detection recording, do this:
1. Select the button to display the Video Surveillance Settings.
2. Select the Motion detection recording option and then enter in the time
when CyberLink YouCam should end its motion detection.
3. Use your mouse to resize and then drag the box to the location on the video
image where you CyberLink YouCam to detect motion.
4. Use the Sensitivity slider to set the level of motion sensitivity.
5. Select Start. CyberLink YouCam will begin to capture videos when it detects
motion.
Note: CyberLink YouCam remains in stand by mode for motion recording until the
specified end time or until you select the Stop button.
6. Any recorded videos are placed in the captured content area and saved to the
capture folder specified in Capture settings.
Note: you can right-click on the captured video and select Locate File on Disk to view its
saved location on your computer.