User`s guide

CyberLink YouCam
18
1. When you are ready to begin recording, click the Timed REC
button or click
and then select Timed Recording. The Timed
Recording window will be displayed.
2. Select the Time-lapse recording option and then specify the time
you want the recording to stop in the field provided.
3. Enter in the amount of time between captures in the Snapshot
every field.
4. Click on Start. CyberLink YouCam will begin to capture snapshots
of the web cam video at the specified intervals.
Note: CyberLink YouCam will continue recording until the specified stop
time or when you click the Stop button.
Motion Detection Recording
When motion detection recording is enabled, CyberLink YouCam will
begin recording when your web cam detects motion and then stop
once the movement has ended.
Note: You may want to use the timestamp with motion detection recordings
in order to know the time the recording occurred. See "Timestamp" on page
13 for more information.
To enable a motion detection recording, do this:
1. When you are ready to begin recording, click the Timed REC
button or click
and then select Timed Recording. The Timed
Recording window will be displayed.
2. Select the Motion detection recording option and then enter in
the time when CyberLink YouCam motion detection will end.
3. Use your mouse to resize and then drag the red box to the location
where you want motion to be detected.
4. Click on Start. CyberLink YouCam will begin to capture videos
when it detects motion.
Note: CyberLink YouCam will be in stand by mode for motion recording until
the specified stop time or until you click the Stop button.