User`s guide

Chapter 2: CyberLink YouCam
17
recording. You can also make a time-lapse recording or set up your web
cam to begin recording when it detects motion.
To enable a timed recording, click the Timed REC button or click
and
then select Timed Recording. Within Timed Recording, you can select
from one of the following types:
• Continuous Recording
• Time-lapse Recording
• Motion Detection Recording
Continuous Recording
The Continuous Recording option lets you set a recording that will
continue, uninterrupted, until the specified stop time.
To enable a continuous recording, do this:
1. When you are ready to begin recording, click the Timed REC
button or click
and then select Timed Recording. The Timed
Recording window will be displayed.
2. Select the Continuous recording option and then specify the
time you want the recording to stop in the field provided.
3. Click on Start. CyberLink YouCam will begin to record the current
web cam video. You can add emotion and applied effects to your
web cam video as required. See "Web Cam Effects" on page 10 for
more information.
Note: CyberLink YouCam will continue recording until the specified stop
time or when you click the Stop button.
Time-lapse Recording
When Time-lapse Recording is enabled, CyberLink YouCam will take a
series of snapshots at specified intervals. These snapshots are then
placed together in an outputted video, creating a video that uses time-
lapse photography.
To enable a time-lapse recording, do this: