Operation Manual

59
PowerProducer Preferences
File format: indicates the video format of the file that will be burned to your
disc. If available, you can select a different video file format from the drop
down. However, not all selected disc types allow you to change the video file
format.
Video quality: select the video quality for your disc from the drop-down. The
video qualities available depend on the video disc format you selected in the
Select Your Media window. They offer different bitrates, resulting in files of
different sizes. The higher the quality of the video, the larger the resulting file
and the shorter the length of video that can fit onto a disc.
Smart Fit: after selecting your video quality, select this option to have
CyberLink PowerProducer ensure the best quality of video for your specific
disc type. If the file size of the produced video will not fit on disc you are
burning to, CyberLink PowerProducer will slightly lower the bitrate, but not
lower the resolution, to ensure the best quality video fits exactly to the
capacity of the disc you are using.
Audio format: indicates the format of the audio that will be burned to your
disc. If available, you can select a different audio format from the drop down.
However, not all selected disc types allow you to change the audio format.
The following is a list of the possible audio formats: LPCM is an uncompressed
audio format; Dolby Digital* uses the Dolby Digital Consumer Encoder format
to create a high quality stereo sound output; Dolby Digital 5.1* uses the Dolby
Digital Consumer Encoder format to create a high quality six channel sound
output.
Note: * optional feature in CyberLink PowerProducer. Check the version table on
our web site for detailed versioning information.
Location: select the location where your disc will be played. Location
determines the TV format (PAL or NTSC) of the video that is burned to the
disc.
Reduce Video Blocky Artifacts (Intel SSE4 optimized): if your computer
supports Intel SSE4, select this option to reduce the blocky artifacts that may
appear on video recorded with a low resolution or reduced bitrate.
General Preferences
In the Preferences window, select the General tab. The available options are as
follows:
Use system default language: select this option for the CyberLink