Operation Manual

54
CyberLink PowerProdu cer
5. Click Start to begin. CyberLink PowerProducer will burn the disc and make it
compatible.
6. Click Close to return to the Disc Utilities window.
Finalizing/Unfinalizing a Disc
If you want to view a DVD-RW disc with -VR profile on a disc player, you must first
finalize the disc, as unfinalized discs cannot be viewed on some home disc players.
When you finalize a disc, no further data can be added to it, even if the disc
contains sufficient space. However, you can unfinalize a disc in order to perform
further editing functions (such as appending video, adding chapters, etc.).
To finalize or unfinalize a disc, do this:
1. In the Disc Utilities window, click Finalize/Unfinalize. The Finalize or Unfinalize
window opens (depending on state of the disc).
2. Insert your disc and select your drive.
3. Click Start to begin. CyberLink PowerProducer will finalize/unfinalize the disc.
4. Click Close to return to the Disc Utilities window.
Burning a Disc From a Disc
Image
A disc image is a file on your computer (in .RDF or .ISO format) that is the duplicate
of the contents and file structure of a disc. CyberLink PowerProducer lets you burn
a disc image to a disc.
To burn a disc image, do this:
1. In the Disc Utilities window, click Burn Disc From Image.
2. Click to select the disc image you want to burn to a disc.
3. Insert a blank disc and then select your drive in the Drive drop-down if
required.
4. Select a Recording speed for burning the disc. If you encounter errors during
the burning process, try lowering the burning speed.
5. Click Start to begin. CyberLink PowerProducer will burn the disc image to the