Operation Manual

Chapter 3: Right-to-Disc

4. Select a recording speed in the Maximum speed drop-down list,

then click .

5. Select DV from the Recording from drop-down list.

Note: Be sure that your DV camcorder is set to VCR mode.

6. Select the duration of your DV tape under the DV tape length

drop-down list.

7. Set the TV format (NTSC or PAL) by selecting the location where

you want to play your disc. You may also set other options at this

point:

• To record a specific length of video, enter the mark in and out

times. The steps are similar to cutting a clip. For more

information, see "AB Cut" on page 27.

• To give the disc a volume label, enter the desired label. This

name appears when the disc is played on a computer.

•To give the disc a Disc name, enter the desired name. This name

appears when the disc is played on a disc player.