Operation Manual

Chapter 2: Produce a Movie Disc
49
Final Output
After you have acquired your media, assembled your story, edited your
clips, added audio and other effects, customized the layout and look of
your disc, then it’s time to finalize your production.
CyberLink PowerProducer offers several methods to finalize your
production, which are useful under different circumstances. You can
burn your production to disc as the last step in your movie production
process, save your production as a disc image for later burning or create
a DVD folder to organize your media files on your hard drive.
Depending on your burning drive and disc type, one or more of these
options may be available simultaneously.
Set Your Burning Configuration
Before you burn to disc for the first time, set your burning configuration
on the Final Output window. After you set this configuration, CyberLink
PowerProducer uses the same configuration each time you burn until
you change the settings.
To set your burning configuration, do this:
1. Click .
2. Select your recording drive.
3. Select a recording speed.
4. Check the Include buffer under-run protection option to ensure
your drive writes without errors when your hard drive is busy or
system resources are low.
5. Click to set your configuration and return to the Final
Output window.
Note: You can erase a disc before burning to it by clicking . See
"Erase a Disc" on page 78 for more information.