Operation Manual

Chapter 2: Produce a Movie Disc
21
Capture from an HDV Camcorder
You can capture video (including the audio portion) from an HDV
camcorder for use in CyberLink PowerProducer by selecting HDV
Camcorder.
To capture from an HDV camcorder, do this:
1. Click Video under the Capture option on the Content window.
2. In the window that opens, select HDV camcorder from the drop-
down.
3. Locate the content you want to capture.
Note: Be sure that your camcorder is set to VCR mode.
• You may use the playback controls under the preview window.
• You may enter the time code of the first frame of the video you
want to capture.
• You may enter a duration (in minutes and seconds) in the Auto-
recording duration field to instruct CyberLink PowerProducer to
capture this amount of video from the current position when
you begin recording.