Operation Manual

CyberLink PowerProducer

2. In the window that opens, select DV camcorder from the drop-

down.

3. Locate the content you want to capture.

Note: Be sure that your DV camcorder is set to VCR mode.

• You may use the playback controls under the preview window.

• You may enter the time code of the first frame of the video you

want to capture.

• You may enter a duration (in minutes and seconds) in the Auto-

recording duration field to instruct CyberLink PowerProducer to

capture this amount of video from the current position when

you begin recording.

4. Click to begin capture.

5. Click to end capture when you have captured the video you

want.

Note: Non-realtime capture continues capturing and processing after the

video has finished playing in order to ensure that no frames are dropped

during capture.