Operation Manual

CyberLink PowerProducer 3

4. Select a recording speed in the Maximum speed drop-down list,

then click .

5. Select HDV from the Recording from drop-down list.

Note: Be sure that your camcorder is set to VCR mode.

6. Select the duration of your HDV tape under the HDV tape

length drop-down list.

7. Set the TV format (NTSC or PAL) by selecting the location where

you want to play your disc. You may also set of other options at

this time:

• To record a specific length of video, enter the mark in and out

times. The steps are similar to cutting a clip. For more

information, see AB Cut on p.30.

• To give the disc a volume label, enter the desired label. This

name appears when the disc is played on a computer.

• To give the disc a Disc name, enter the desired name. This

name appears when the disc is played on a disc player.