Operation Manual

Chapter 2: Produce a Movie Disc
47
Final Output
After you have acquired your media, assembled your story, edited
your clips, added audio and other effects, and customized the layout
and look of your disc, then it’s time to finalize your production.
CyberLink PowerProducer offers several methods to finalize your
production, which are useful under different circumstances. You can
burn your production to disc as the last step in your movie
production process, save your production as a disc image for later
burning, or create a DVD folder to organize your media files on your
hard drive. Depending on your burning drive and disc type, one or
more of these options may be available simultaneously.
Set Your Burning Configuration
Before you burn to disc for the first time, set your burning
configuration on the Final Output window. After you set this
configuration, PowerProducer uses the same configuration each time
you burn until you change the settings.
To set your burning configuration, do this:
1. Click .
2. Select your recording drive.
3. Select a recording speed.
• The Include buffer under-run protection option ensures that
your drive write without errors when your hard drive is busy
or system resources are low.
4. Click to set your configuration and return to the Final
Output window.
Note: You can erase a disc before burning to it by clicking
. See Erase a Disc on p.76 for the steps to follow.