Operation Manual

CyberLink PowerProducer 3
22
Capture from a DV Camcorder
You can capture video (including the audio portion) from a DV
camcorder for use in PowerProducer by clicking DV Camcorder.
To capture from a DV camcorder, do this:
1. Click Video under the Capture option on the Content window.
2. In the window that opens, click .
3. Locate the content you want to capture.
Note: Be sure that your DV camcorder is set to VCR mode.
• You may use the playback controls under the preview
window.
• You may enter the timecode of the first frame of the video
you want to capture.
• You may enter a duration (in minutes and seconds) in the
Auto-recording duration field to instruct PowerProducer to
capture this amount of video from the current position when
you begin recording.
4. Click to begin capture.