Operation Manual

CyberLink PowerDirector

An interval/scene is the content you recorded each time you pressed record and

then stop during the video shooting process. For help on using this function, use

the tips on the user interface.

Manual Batch Capture

Using manual batch capture* gives you more control over the capturing process

and ensures that the scenes you want to include are captured. Manual batch

capture is recommended when you know which scenes you want to capture and

have a good idea where they are located on the tape.

Click the button to access the manual batch capture feature. For help on

using this function, use the helpful tips on the user interface.

Note: * optional feature in CyberLink PowerDirector. Check the readme file for detailed

versioning information.

Capturing from an HDV Camcorder

You can capture video footage you shot with an HDV camcorder. Use the

capture from an HDV camcorder option only if your camcorder connects

to your computer using an IEEE 1394 (FireWire) cable. To a capture scene

from your HDV camcorder, use the capture player controls (record, stop, fast

forward, rewind, etc.) underneath the capture preview window.

If your HDV camcorder connects to your computer via a USB connection, just

import the video files directly from your camcorder, as if it was another hard drive

on your computer. See "Importing Media" on page 25 for information on

importing video files from your computer.

Capturing from a TV Signal

If your computer has a TV tuner card installed and you want to capture

segments from your favorite programs, select this option. To capture,

use the capture player controls (record, stop, change channel, etc.)

underneath the capture preview window.